Step 1 - Choose the right flag pole base

Once you have decided on where you would like your flag(s), make sure you choose a suitable base. We have two options:

• Car base:
• Ground spike:

Alternatively, you can use cable ties and attach the pole to a secured upright post

Step 2 - Prepare the flag pole base

Car base:

• Assemble the base and secure with the screw

Ground spike:

• Place the ground spike point-down into the grass (plastic sleeve end up).
• Hit the top with your rubber mallet until the round disc touches the ground
• Keep it vertical! If you hit rock, stop and try another spot

Step 3 - Assemble your pole

Take all the pole sections out of the black bag.

Start with the section that has the silver end - that is the base which connects to the ground spike. Slot the remaining three sections together on top, from widest at the bottom to narrowest at the top.

For Vertical poles, you’re done!

For L-shaped poles, slot the horizontal arm to the top (narrowest) section

In windy weather, use the tape provided to secure the connection between the horizontal arm and vertical pole - wrap the tape a couple of times around

Step 4 - Attaching the flag

Open up the flag and find the sleeve opening (it’s the end next to the metal eyelet ring). Feed the narrow end of the pole through this sleeve opening until the pole reaches the end of the sleeve

If it’s an L-shaped pole, you might need to gently wiggle it around the corner

Step 5 - Clip on the metal weight

In strong winds, we recommend clipping the round metal weight onto the metal eyelet found next to the flag’s sleeve opening. This will help weigh down the flag

Step 5 - Complete

Slot the pole onto the ground spike and boom, you’re done